VOOPOO Drag Nano 2 Review - New Generation of Drag Nano

Today we are going to discuss the newly released Voopoo Drag Nano 2. Its original generation was launched in the early 2019 and has been hot for a while. Whether the Drag Nano 2 will take place of the original Drag Nano? Let’s check it out on this review to learn about what’s new.

Design & Appearance
The Drag Nano 2 contains an 800mah battery with a maximum output of 20 watts, the mod can output at 3-level adjustable power. The included pods have a liquid capacity of 2ml, which are upgraded from VINCI Pod and compatible with it. If you are the fan of Vinci Pod, don’t hesitate to try this Drag Nano 2. It will give you an excellent experience.

The cartridge is visible and adopts top-filling system, with unprecedented flavor by its built-in 0.8Ω and 1.2Ω Coil. It inherits the good taste and quality of VINCI POD. It solves the juice leakage problem of the orignal Drag Nano. No worry about juice leakage any more.

The VOOPOO DRAG Nano 2 only has 1 button for functionality such as turning the device on/off or changing the power setting.

There is an airflow control slide on the side of the device. To change the airflow you simply need to slide the knob up or down. While pushed down the airflow is a nice restrictive draw and when it’s pushed up it’s fairly loose.

Between the airflow control slide and fire button are three indicator lights which show the battery level.

Besides, on the top of the device is a slot where the included lanyard chain can be attached.

What you can get from the VOOPOO Drag Nano 2 Kit?
1 x DRAG Nano 2 Device
1 x DRAG Nano 2 Replacement Pod (2ml)0.8Ω
1 x DRAG Nano 2 Replacement Pod (2ml)1.2Ω
1 x Type-C Cable
1 x User Manual
1 x Lanyards