GeekVape has been on a roll with their never-ending lineup of absolutely top-of-the-line vaping hardware, with the GeekVape M100 100W Kit showing off just how much they excel at producing starter kits that are both user-friendly and unbelievably high-performance.
Offering a 100 max wattage, the device uses an integrated 2500mAh battery to supply plenty of power, while providing the phenomenal Z Nano 2 Tank that provides nothing but dreamy vapor rich in flavor. With a variety of output modes, you’ll be able to explore lots of customizable features, made all the easier with a comprehensive display screen that lets you navigate settings easily. And, if that wasn’t enough, the IP68 rating means that this device is waterproof, scratchproof, dustproof and shockproof.
How to Use the GeekVape M100 100W Kit
If you’re planning on getting your hands on the M100, you’re gonna need to get started enjoying all of its features in no time, so check out this easy, step-by-step guide to setting it up and using it initially.
Step #1: First, you’ll want to get your mod charged up. Take the M100 Box Mod out of the box and connect it to the Type-C charging cable, and then charge it using a USB charger until the device reaches a full charge.
Step #2: While your mod is charging, you can get your tank set up. Remove the tank from the package, and then decide whether you wanna use the included 0.2ohm coil that’s pre-installed, or the 0.6ohm KA1 mesh coil that is also included. Prime your coil properly with your e-liquid before filling your tank through the top-filling fill port. When your mod is charged, you can attach the coil to the mod through the 510-threaded connection.
Step #3: Now, you can turn on your device and start adjusting your settings. Pick the output you want to vape at, according to the coil you’ve selected, and adjust the wattage up to 100 watts using the display screen and navigation buttons. Or, if you want a more advanced style of vaping, consider the bypass, voltage or stealth mode, which can all be selected through the display screen.
Final Step: Now, you can take your first puff of vapor by pressing on the firing button and pulling through the mouthpiece. Make adjustments to your output as desired.
Overall, GeekVape’s M100 100W is a vaping system that combines convenience and user-friendliness with exceptional vapor output and customizability. Now that you know how to set it up, you can start vaping and see what makes this vaping system such a sought-after kit on today’s market.